Fantech
ProductsFansBy ApplicationOperating Theatre

Operating Theatre fans

Refine Your Search
Advanced Search Fan-Selector Fan Selector
Application
Construction
Short Case Series
Exhausting or supplying air in a wide range of commercial and industrial applications.
The casing is of galvanised steel with a polyester epoxy finish as standard.
AP Series In-Line Direct Drive
Commercial and industrial supply or exhaust air applications such as shopping centres, office buildings and car parks, through to industrial processes and equipment ventilation.
Casings are hot-dip galvanised mild steel, or pre-galvanised steel.
Magnetite Series with VSDEcoRange Energy Efficient Fans
Commercial and industrial, supply or exhaust applications such as hospitals, schools and universities, convention centres and office blocks.
Casings are hot-dip galvanised mild steel, or pre-galvanised steel.
BladeVane Adj Pitch Fans
Commercial and industrial supply or exhaust air applications such as shopping centres, office buildings and car parks, through to industrial processes and equipment ventilation.
Casings are hot-dip galvanised mild steel, or pre-galvanised steel.
APV Series In-Line Vertical
Commercial and industrial supply or exhaust air applications such as shopping centres, office buildings and car parks, through to industrial processes and equipment ventilation.
Casings are hot-dip galvanised mild steel, or pre-galvanised steel.
APB Series In-Line Belt Drive
Commercial and industrial supply or exhaust air applications such as shopping centres, office buildings and car parks, through to industrial processes and equipment ventilation.
Casings are hot-dip galvanised mild steel, or pre-galvanised steel.
APCR Series In-Line Contra-rotating
Supply or exhaust from a vast range of applications, where additional pressure is required; generally ducted.
Contact Fantech for more information.
PowerLine Series
Commercial and industrial supply or exhaust air applications such as shopping centres, office buildings, exhibition centres, hotels, health centres, schools and universities.
Galvanised steel housings with 35mm TDF profile flange connections.
FlexLine Series
Commercial and industrial supply or exhaust applications requiring higher pressures for air filtration or long duct runs.
Galvanised steel housings with 35mm TDF profile flange connections and spun aluminium inle...
Supply air roof axial fan
Suitable for almost any ventilation duty, either supply or exhaust.
Galvanised steel base, cowls/windbands are of plastic, fibreglass or galvanised steel.
Smoke spill roof axial fan
Suitable for almost any ventilation duty.
Galvanised steel base, cowls/windbands are of plastic, fibreglass or galvanised steel.
Gamma Supply Series
Supplying fresh air to an air handling unit or to an air conditioning system in commercial buildings.
Cowls are of UV-stabilised plastic.
Gamma Ultra Supply
Supplying fresh air to an air handling unit or to an air conditioning system in commercial buildings.
Cowls are of UV-stabilised plastic.
Alpha Relief Series
May be used as the air intake and discharge point where the fan is mounted remotely.
MRV1, MRV2 and sizes 1 to 4 - Base and cowl are made of UV-stabilised plastic.
Neta Twin Series  - Centrifugal Fans
Complete with a standby fan and motor for applications requiring standby facilities.
Galvanised sheet steel housing with modern flange connections.
Smoke spill roof axial fan
Industrial and commercial smoke spill applications.
Pressed galvanised steel base, cowls/windbands are of plastic or galvanised steel.
ECOtronic EC AxialEcoRange Energy Efficient Fans
The ECOtronic range is most efficient in applications where conditions vary during the course of the day such as exhibition centres, schools, universities and health facilities.
Galvanised steel construction.
Alpha Relief Air Vents - Bushfire Code Compliant
To control relief air and the pressure within buildings in bushfire prone areas.
Cowls are of galvanised steel.