How to use the Fantech COVID-19 Airborne Risk Calculator

In the previous Technically Speaking we introduced the concept of an Airborne Infection risk calculator. The Fantech COVID-19 Airborne Risk Calculator is a simplified calculator based on the Airborne Infection Risk Calculator Version 3.0 Beta by...

Ventilation and Covid-19

While life has returned to a sense of normality for most people after the various COVID-19 lockdowns, the reality is that COVID-19 is still with us. As time passes we are seeing new COVID-19 variants and we are learning more about how the virus is...

System Effects

When selecting a fan for an application, it is common practice to use the manufacturer’s catalogue data. Catalogued air flow performance data is created from test results conducted to standards such as ISO5801. Testing to a standard ensures...

Discharge guide vanes on axial fans

Some time ago, guide vanes were commonly supplied with axial fans in order to improve fan pressure development. However, low energy costs and a lack of focus on energy efficiency resulted in guide vanes being removed from axial fans, to reduce their...

Air Leakage

Air leakage is defined as “air, other than exhaust air, return air and/or relief air that escapes from an air-handling system in an uncontrolled manner.” The consequences of air leakage can include a reduction in delivered air flow; thermal losses...

Kitchen exhaust fan casings and cowls

Recently, the Standard relating to kitchen exhaust fan casings and cowls for commercial buildings was updated. As there has been some confusion regarding Section 6.2 of AS/NZS 1668.1 2015, Fantech has sought an interpretation from the committee...

Air flow balancing via diffuser sensors

The AirLink Integrated Variable Air Volume (VAV) system is the next step in efficient HVAC system design. This modern system is based on electronic VAV diffusers working with an even pressure duct design. The system removes the need for air flow...

Ventilation in small indoor swimming pools

Ventilation is essential for enclosed swimming pools and spa rooms for the following reasons: To prevent the enclosure becoming excessively humid; To eliminate or minimise condensation; To prevent the build-up of chloric acids, which are...

In-Duct and Free-Field noise levels

Fan manufacturers can choose to publish either ‘In-Duct’ or ‘Free-Field’ noise levels depending on where the noise is measured. The difference between the two terms is not well understood by many engineers and can lead to underestimation of noise...

Introduction to NCC Performance Solutions

In 2013, an independent report highlighted that 70% of the $1.1 billion per annum productivity gains delivered by Australian Building Codes Board (ABCB) reforms were derived from the current performance-based code. The report also identified that...

VGVAV diffusers and duct design considerations (Part two)

Variable Geometry Variable Air Volume (VGVAV) diffusers are an effective method of controlling the thermal comfort of a room whilst reducing energy consumption. VGVAV diffusers are pressure dependent devices and to operate at optimal...

VGVAV diffusers Pressure on design yields efficiencies (Part One)

Variable Geometry Variable Air Volume (VGVAV) diffusers have been used for more than 40 years to effectively manage the air distribution system in a building. The functionality of early diffusers was limited in their capabilities, but in the past 10...

Electrical approvals and compliancy

Access to electrical equipment manufactured overseas is now easier thanks to the internet and low cost express shipping. However the greater choice of products is only one criterion when deciding to make a purchase and contractors must also take...

Clarifying the compliance of low profile PVC duct

A number of new types of low profile plastic duct have recently been released onto the Australian market. It is important for specifiers and installers to ensure the new product meets Australian standards and is compliant with the Building Code...

JetVent fans BCA compliance requirements

Are JetVent fans “Deemed-to-Satisfy”? To meet the 'Deemed-to-Satisfy' (DTS) requirements of the BCA, a car park ventilation system must comply with AS1668.2:2012 or an adequate system of permanent natural ventilation (Section F4.11) and...

Selecting the right fan blade material for the job - Part 2

As discussed in the last edition of TechTalk (issue number 77), materials perform differently when they operate at various stresses, temperatures, speeds, and in corrosive environments. For this reason it is important to select the right fan...

Selecting the right fan blade material for the job - Part 1

Sometimes it can be difficult to identify which type of fan impeller blade material is required for a given application. Typical blade materials supplied by Fantech include GRP (Glass Reinforced Polypropylene), Aluminium, Nylon, and Anti-Static...

The truth about fan performance

To ensure a ventilation system functions in the built environment as it was intended in the design stages, it is crucial to know that the fan’s actual performance matches the catalogue data published by the manufacturer. The only true way to...

The effect of Variable Speed Drives(VSDs) on External Rotor(ER) Motors

External Rotor Motors are used extensively by Fantech. These are compact, lightweight motors specifically designed for fans and ventilation products. To increase the life of three phase External Rotor Motors when controlled by a VSD, it...

Intelligent ventilation solutions for car parks

A good ventilation system is vital in car parks. It must provide fresh air and ensure harmful pollutants such as carbon monoxide, nitrous oxides and various fumes from the vehicle’s fuels do not accumulate and reach toxic levels. Traditionally car...

A simple guide to selecting fan motors for hazardous locations

What sort of fan motor do I need for my spray painting booth? This type of question often confronts our sales engineers. While this appears to be a straightforward request, a spray booth could be classified as a hazardous area...