Minivent Series – MV304E
Location Designation
Project Notes
Minivent Series
Description
The Minivent Series of axial roof units has been designed for use in a wide range of free intake or ducted exhaust air applications. They can be speed controlled and are available in 6 sizes ranging from 112 to 350mm diameter.
Features
  • Robust, lightweight construction.
  • Wide choice of speeds for most sizes.
  • All motors are speed controllable.
  • Can be used on ducted systems.
  • Can be mounted at angles up to 30°.
  • Backdraft shutters can be fitted to fans 250 to 350mm diameter (see Special Note).
  • Units for supply air applications can be supplied. Refer to Alpha supply range.
  • Robust, lightweight construction.
  • Wide choice of speeds for most sizes.
  • All motors are speed controllable.
  • Can be used on ducted systems.
  • Can be mounted at angles up to 30°.
  • Backdraft shutters can be fitted to fans 250 to 350mm diameter (see Special Note).
  • Units for supply air applications can be supplied. Refer to Alpha supply range.
Construction
 Cowls are of UV-stabilised injection moulded plastic.
The impellers are of powder coated galvanised steel.
Motor
 Type - external rotor, squirrel cage induction motors
Electricity supply - 230V, single-phase, 50/60Hz
Bearings - sealed-for-life, ball
Speed-controllable
Motor protection - IP44
Testing
 Air flow tests to BS848:Part1, 1980
Noise tests to BS848:Part2, 1985

Technical Data - MV304E

Speed [rps]Avg. dBA @ 3mkWatts (Input)AmpsMax.°CApprox. Weight [kg]
22440.120.54506.5

Sound Data

Type631252505001K2K4K8K
Inlet66676763585449
 
Minivent Series – MV304E
Suggested Specification
The roof units shall be of the Minivent Series as designed and manufactured by Fantech Pty Ltd.
The axial impellers shall be direct-driven by speed-controllable, external rotor motors with integral thermal protection.
The cowl shall be of UV-stabilised, injection moulded plastic with built-in terminal box.
All models shall be fully tested to BS848:Part 1, 1980 for air flow and BS848:Part 2, 1985 for noise.
  

Dimensions

Dimension Drawing
ABCDE
35041055350570

*All dimensions in mm, unless otherwise stated
Contacts



OFFICES & AGENTS

Victoria
Fantech Pty. Ltd.
Tel:+61 (03) 9554-7845

New South Wales
Fantech Pty. Ltd.
Tel:+61 (02) 8811-0400

Uniair Distributors Pty. Ltd.
Tel:+61 (02) 4961-6088
Refrigeration and Air Supplies
Tel:+61 (02) 4226-5133

South Australia
Fantech Pty. Ltd.
Tel:+61 (08) 8294-0530

Queensland
Fantech Pty. Ltd.
Tel:+61 (07) 3299-9888
Capricorn Air Conditioning
Tel:+61 (07) 4775-5222

Northern Territory
Fantech Pty. Ltd.
Tel:+61 (08 ) 8947-0447

Western Australia
Systemaire Pty. Ltd.
Tel:+61 (08) 9209-4999

Tasmania
Major Air Pty. Ltd.
Tel:+61 (03) 62736455

ACT
Idealair Group Pty. Ltd.
Tel:+61 (02) 6280-5511

Auckland
Fantech (NZ) Ltd.
Tel:+64 (09) 444-6266

Christchurch
Fantech (NZ) Ltd.
Tel:+64 (03) 379-8622

Wellington
Fantech (NZ) Ltd.
Tel:+64 (04) 566-0532