GE Series – CGD454
Location Designation
Project Notes
GE Series
Description
The GE Series of vertical exhaust centrifugal roof units has been specifically designed to exhaust grease and oil laden air from applications such as fast food and restaurant kitchens. The design incorporates a grease/water separator which plumbs excess water away from the unit while retaining the oil in a reservoir for later removal.
There are 7 sizes in the range extending from 350 to 710mm diameter.
Features
  • Robust, galvanised construction.
  • Choice of speeds available.
  • Fitted with a high performance backward-curved centrifugal fan.
  • Quick release toggle clamps on windband provide easy access for cleaning and maintenance of impeller.
  • Backward tilting fan body allows easy access for cleaning unit base.
  • Grease/water separator retains oil in a reservoir for later removed.
  • Robust, galvanised construction.
  • Choice of speeds available.
  • Fitted with a high performance backward-curved centrifugal fan.
  • Quick release toggle clamps on windband provide easy access for cleaning and maintenance of impeller.
  • Backward tilting fan body allows easy access for cleaning unit base.
  • Grease/water separator retains oil in a reservoir for later removed.
Construction
 Galvanised steel construction with a powder-coated finish. Backward-curved centrifugal impellers.
Motor
 Type - standard squirrel cage induction motors
Electricity supply - single or three-phase to suit a wide range of voltages and frequencies
Bearing - sealed-for-life, ball
Speed-controllable using variable speed drives
Testing
 Air flow to BS848:Part 1, 1980
Noise tests to BS848,Part 2, 1985

Technical Data - CGD454

Speed [rps]Avg. dBA @ 3mkWatts (Input)AmpsMax.°CApprox. Weight [kg]
23570.751.7940104

Sound Data

Type631252505001K2K4K8K
Inlet8482777468696965
 
GE Series – CGD454
Suggested Specification
The roof ventilators shall be of the GE Series vertical exhaust type as designed and manufactured by Fantech Pty Ltd.
Impellers shall be backward-curved centrifugal design. The housing shall incorporate a grease/water separator and grease reservoir. Access for impeller cleaning shall be by removal of the windband via quick release toggle clamps. Access for cleaning the base shall be via a tilt back fan body.
All models shall be fully tested as a complete assembled unit to BS848:Part1, 1980 for air flow and BS848:Part 2 for noise.
  

Dimensions

Dimension Drawing
ABCDEF
80090093592860980

*All dimensions in mm, unless otherwise stated
Contacts



OFFICES & AGENTS

Victoria
Fantech Pty. Ltd.
Tel:+61 (03) 9554-7845

New South Wales
Fantech Pty. Ltd.
Tel:+61 (02) 8811-0400

Uniair Distributors Pty. Ltd.
Tel:+61 (02) 4961-6088
Refrigeration and Air Supplies
Tel:+61 (02) 4226-5133

South Australia
Fantech Pty. Ltd.
Tel:+61 (08) 8294-0530

Queensland
Fantech Pty. Ltd.
Tel:+61 (07) 3299-9888
Capricorn Air Conditioning
Tel:+61 (07) 4775-5222

Northern Territory
Fantech Pty. Ltd.
Tel:+61 (08 ) 8947-0447

Western Australia
Systemaire Pty. Ltd.
Tel:+61 (08) 9209-4999

Tasmania
Major Air Pty. Ltd.
Tel:+61 (03) 62736455

ACT
Idealair Group Pty. Ltd.
Tel:+61 (02) 6280-5511

Auckland
Fantech (NZ) Ltd.
Tel:+64 (09) 444-6266

Christchurch
Fantech (NZ) Ltd.
Tel:+64 (03) 379-8622

Wellington
Fantech (NZ) Ltd.
Tel:+64 (04) 566-0532